News

How to use the bearing remover

1. Disassembly of the outer ring Remove the outer ring of the interference fit, and install a few outer ring extrusion screw screws on the 8-shaped side piece on the circumference of the outer casing, and tighten the screw evenly while disassembling. These screw holes

Engineering machinery bearing parts application

After more than ten years of hard work, Jintai Company has cooperated with various host manufacturers to develop a variety of self-lubricating bearing materials suitable for chassis running mechanisms, body parts, hydraulic components, etc., including bimetallic boundary

Application of sliding bearings in construction machinery

Type of construction machinery: 1 lifting equipment such as tower cranes, self-propelled cranes, mast cranes, grab cranes, etc. 2 Excavation machinery such as single bucket excavator, multi bucket excavator, rolling excavator, milling excavator, tunnel boring machine

What is the difference in the way copper sleeves are cast?

Copper sleeve casting is mainly divided into centrifugal casting, continuous casting, sand casting and special casting. Centrifugal casting is the process of drawing the molten metal to the edge of the mold by centrifugal force. The centrifugal casting model is a mold,

Sewage pump bushing material selection points

Because of the special working environment, the bushings on the sewage pump need to have very high reliability and special performance and requirements such as corrosion resistance. According to the customer's different use environment and requirements, our company