Copper sets of features is high hardness, excellent wear resistance, not easy to have killed the scene, a better casting and cutting function, in the atmosphere and fresh water has outstanding corrosion resistance. (20Mpa below) and high sliding speed (8m / s), such as connecting rod, bushing, bearing, gear, worm gear and so on.
Features:
Compression capacity: copper sleeve compression ability is also good, and its appearance pressure, can MPTZ flange integrated oil-free bushing excellent to accept the bearing side pressure, high load pressure condition copper bushing It is possible to perform the operation.
Corrosion: Another feature of copper bushing is corrosion resistance, excellent corrosion resistance. It is mainly used in the atmosphere and fresh water, because this environment is still relatively good. In the process of using copper bushings, is usually not easy to show the status of the killed. The corrosion resistance of copper bushings mainly reflects the copper arm of the excavator arm in some chemical elements, its function is good, even in the absence of lubricant and water quality lubricant conditions can still carry out normal operations, And the self-lubricating function is still able to get stuck.
Wear resistance: wear-resistant copper sleeve is still a good function, not the same as the raw material of the device has a different characteristics. Copper bushing parts of the internal arrangement is still relatively tight, will not show too loose picture, it is no air hole trachoma, so from the appearance of the copper bushing is still bright, its color contrast. And the most important is its hardness is relatively high.
Copper sets in the mechanical equipment to play the effect:

Copper sets of machinery and equipment in the current application of a wide range of contrast. Copper bushings in the machine plays a lot of effects, such as to make it reduce the conflict, cut sensation, reduce noise, etc., these are copper sleeve in the machine to play the effect. Copper sets in the current market has been increasing use, and it is also a comparison of trust. In the process of mechanical operation, due to long-term conflict caused by parts wear, this time will need to use copper sleeve. Because it can help it to reduce conflict.