The chemical composition of the cast tin bronze 10-1 copper sleeve is as follows:
|
Alloy brand |
Alloy name |
The main chemical composition /% |
Impurity limit/% |
||||||||
|
Sn |
Zn |
Pb |
P |
Ni |
Ni |
Zn |
Pb |
Mn |
Total |
||
|
ZCuSn10P1 |
10-1 tin bronze |
9.0～11.5 |
— |
— |
0.5～1.0 |
— |
0.10 |
0.05 |
0.25 |
0.05 |
0.75 |
Implementation of the national standard number: GB/T 1176-1987;
Characteristics: The tin bronze 10-1 copper bushings produced in the early morning bearing have high hardness, excellent wear resistance, and are less likely to cause seizure, have better casting performance and cutting performance, and have good resistance to atmospheric and fresh water. Eroded.
The use of cast tin bronze 10-1: Can be used for wear parts that work under high load (below 20MPa) and high sliding speed (8m/s), such as connecting rods, bushings, bearings, gears, turbines, etc.
The tin bronze 10-1 (ZCuSn10P1) is corresponding to other countries as follows:
International Standard ISO: CuSn11P
British Standard BS: PB1
French Standard NF: CuSn12P
Japanese Standard JIS: PBC2
American Standard ASTM: C90710