Although the bearing is a small part of the mechanical workpiece, its role is not limited by the DU boundary lubrication sleeve, bearing the use of the function will directly affect the function of the use of machinery, therefore, the maintenance of bearings than the use of income, everyone I hope the service life of the bearing can be extended, it is necessary to be aware of the following aspects in the maintenance of bearing life:

First, we must pay attention to when the equipment, due to improper rolling stainless steel bushings, the bearing in the operation of the simple problems that will affect the bearing accuracy, function. Therefore, the formation of bearing life so shortened, so in the equipment must be the operation of the specification, the gear pump special cleaning time to clean the bushing, but also to wash, can not be rough wash, to check the relevant parts of the standard is not the equivalent Happening.

Second, the equipment should be carefully checked after the good, check the bearing environment is not suitable for bearing operations, the most important point is the supply of lubrication, lubrication can not be excessive.

Third, the alignment, straightening, assuming no alignment, alignment may cause the bearing subjected to other loads, conflicts and vibration. This leads to accelerated fatigue and reduce the service life of the bearing. It may also damage other components.

Others, the bearing operation time survey bearing operation, if the problem can be found and dealt with in time.