Copper sets of materials, a variety of materials, and each material to adapt to the occasion and so are different, then how to choose their own big help? In order to help some of the friends in the selection can find more suitable for their own home with copper products, Hunan Jintai Hardware and Machinery Co., Ltd. To introduce you to some of the commonly used copper material characteristics:

1, ZCuZn38Mn2Pb2: have good mechanical properties and corrosion resistance, good wear resistance, good cutting performance.

2, ZCuSn10Pb5: corrosion-resistant, especially for dilute sulfuric acid, hydrochloric acid and fatty acids. Structural materials, corrosion resistant, acid resistant parts and crusher bushings, bushings.

3, ZCuSn10Pb1: high hardness, excellent wear resistance, easy to produce bite the phenomenon, have better casting performance and cutting performance, in the atmosphere and fresh water has good corrosion resistance.

4, ZCuPb15Sn8: In the absence of lubricants and water quality lubricant conditions, sliding and self-lubricating performance, easy cutting, casting performance is poor, good corrosion resistance of dilute sulfuric acid.

5, ZCuPb10Sn10: Lubricant performance, wear resistance and corrosion resistance, suitable for use as bimetallic casting materials. Vehicle bearings, the load peak of 100Mpa of the internal combustion engine copper bearing, and piston pin sets, such as friction tablets.

6, ZCuZn25Al6Fe3Mn3 high strength aluminum brass, the highest strength in special brass. With high strength, high hardness, high wear resistance, moderate plasticity and good corrosion resistance. Which is used to cast high-load wear-resistant weights for heavy machinery

7, ZCuAl9Mn2, ZCuAl9Fe4, aluminum bronze has a high strength, high density, chemical stability. Commonly used in the valve body, worm gear, nuts, pipe fittings and so on.

8, ZCuSn10P1 is a typical tin phosphor bronze, hardness and wear resistance are high, can be used to manufacture heavy load, high speed and high temperature work, by the strong friction parts, such as connecting rod bushings, gears, The

9, ZCuSn6Zn6Pb3, ZCuSn5Zn5Pb5, can be used to manufacture medium load and speed work under the bushings, gears, worm gear and other wear-resistant parts.